Any shops using a Precision Plasma table in Oregon


Results 1 to 2 of 2

Thread: Any shops using a Precision Plasma table in Oregon

  1. #1

    Default Any shops using a Precision Plasma table in Oregon

    Looking at a Precision Plasma HDIY Gantry and am wondering if there are any owners in Oregon who would be willing to let me see their machine set up and how well it operates.
    You tube is fine but nothing beats seeing it in person. To be quite honest it has been a little frustrating with the cnc thing because of all the different ways a person can go.
    I am a fabricator and know I want to build my own table. If I had the time I would build my own gantry! There is not a lot to them. I visited with Tom at CandCNC about the electronics and for what I want to do steppers will work fine for me. I am willing to drive a ways but if there was someone in the mid valley or the greater Portland area that would be great. Hope to hear from someone. Thanks.

    Perry

    Similar Threads:
    Last edited by oneweldingpapa; 12-12-2014 at 09:27 PM.


  2. #2
    Registered
    Join Date
    Jul 2011
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Any shops using a Precision Plasma table in Oregon

    Call any time...I have a B&B Systems 4'x8' table in Salem, Oregon
    503.931.7069

    Gary



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Any shops using a Precision Plasma table in Oregon

Any shops using a Precision Plasma table in Oregon