I'm just trying to get a hold of a post for a HAAS VF-3 3 axis Mill preferably in .opt format but will take anything at this point that has support for cutter length and dia compensation and drill cycles ( currently have to output as full xyz moves for peck cycles a 10 line program turns into 2000...) , currently I have a post and have been getting by with frustration but it has no length compensation or dia compensation which entails reprogramming the part instead of making a simple offset adjustment and running the last pass... Hopefully someone will be kind and share I would greatly appreciate it.... I have been searching around with no luck and everyone says use the basic fanuc post but my controller will not read it... And Powermill gives me and error with some posts as well

Similar Threads: