Delcam Powershape & Powermill User Guides/Training Manuals


Results 1 to 4 of 4

Thread: Delcam Powershape & Powermill User Guides/Training Manuals

  1. #1
    Member
    Join Date
    Dec 2007
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Delcam Powershape & Powermill User Guides/Training Manuals

    Looking to find any training or manuals to aid in getting up and running in both Powershape and Powermill.
    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Jun 2014
    Location
    United Kingdom
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default Re: Delcam Powershape & Powermill User Guides/Training Manuals

    You had any luck with this?

    Sent from my SM-G920F using Tapatalk

    Everyday is a school day.


  3. #3
    Member
    Join Date
    Dec 2007
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Delcam Powershape unwanted holes

    Powershape making progress; but not without issue:

    For example, I make a 20x20 box and convert it to composite curve, then I smart surface it and get what looks like a great surface all flat in multiple orientations.

    But, then I convert it to a solid and run the solid doctor and it says there is a hole in one corner. If I automatically fix this non visible hole-- then additional problem of overlapping surfaces comes up. Whats up with this hole?

    I think I'm missing something.



  4. #4
    Registered
    Join Date
    Feb 2009
    Location
    UK
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default

    Hey, I just spotted this thread.

    Your 20x20 'box' is really just a single flat surface. PShape expects a solid to have volume. So because your box is not connected to enough other surfaces to form a volume, it shows you the unconnected edges to report a hole. In your case, all edges are unconnected.

    As a PShape user from V1 (1998) I'm considering a series of YouTube tutorials. Let me know if there'a an audience.

    Cheers!
    Matt



  5. #5
    Member
    Join Date
    Dec 2007
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Delcam Powershape & Powermill User Guides/Training Manuals

    Quote Originally Posted by CADMatt View Post
    Hey, I just spotted this thread.

    Your 20x20 'box' is really just a single flat surface. PShape expects a solid to have volume. So because your box is not connected to enough other surfaces to form a volume, it shows you the unconnected edges to report a hole. In your case, all edges are unconnected.

    As a PShape user from V1 (1998) I'm considering a series of YouTube tutorials. Let me know if there'a an audience.

    Cheers!
    Matt
    Thanks Matt. I missed your post until this evening ... Your insight is appreciated.
    I may ask you a few more questions when I get back on Powershape.
    Regards, Dan

    Sent from my E6910 using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Delcam Powershape & Powermill User Guides/Training Manuals

Delcam Powershape & Powermill User Guides/Training Manuals