Post Processor for Heidenhain iTNC530

[Andy_1967]

Hi I am trying to find a post processor that will work between PowerMill 2015 and a Heidenhain iTNC530. The machine is a DMC635V
I know the machine and controller are a few years behind PowerMill (!), but any help would be much appreciated.

Thanks
Andy H

Similar Threads:

• Need Help!- Heidenhain iTNC530 post for CAMWorks 2014
• Problem- Working on a Heidenhain iTNC530 Post, could use some help.
• Need Help!- I need your help post Heidenhain iTNC530 for ProEngineer