Problem Siemens 810d


Results 1 to 4 of 4

Thread: Siemens 810d

  1. #1
    Member
    Join Date
    Apr 2015
    Posts
    16
    Downloads
    0
    Uploads
    0

    Question Siemens 810d

    Hi,Purchased a CNC machine with a siemens 810d control.
    I am a Heidenhain user so am not farmiliar with Siemens but it came with this machine, is there anyone that can help me out please as i am having difficulty in running more than one programme at once.
    At the moment i am running single programmes from the installed flash card in the siemens 810d control but need to run more than a single programme.
    When i used Heidenhain i just created a programme say call it your name for instance johny in TNC and then inside that programme named the programmes to run ie call programme 1
    call programme 2 and so on
    So in TNC you would then call programme johny and it would run all the programmes named inside that.
    If anyone knows the procedure in Siemens 810d to do this it will be greatly appreciated.
    Also can someone tell me what to put in for Datum shift in Siemens 810d so i can put this inside the programme that i create to run more than a single programme at a time if i need to cut more than one job on the machine?
    Kind Regards
    Johny.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2016
    Location
    88370198
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Siemens 810d

    hello , I'm Renato
    It was purchased in my company a CNC hobbing with SIEMENS 810D system , and I do programming in CAMWorks 2014 ,
    but have no post processor for this system , someone could help me get this post processor



  3. #3
    Registered
    Join Date
    Oct 2016
    Location
    Iran, Islamic Republic Of
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Re: Siemens 810d

    of course
    i have a post processor
    but you have to fix some parts of it to make ready for siemens 810
    that's what I'm doing everyday
    if you had any question you can text me in private
    this file is edited. if you want the original post processor , tell me

    Siemens840D RRR



  4. #4
    Registered Russell840's Avatar
    Join Date
    Jul 2016
    Location
    Northern Mariana Islands
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: Siemens 810d

    Try this one , i think its beter to transfer your backup files with PCIN or another siemens transmitioning programs software .
    best regurds
    Russell

    Attached Files Attached Files
    Last edited by Russell840; 11-01-2016 at 05:25 AM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Siemens 810d

Siemens 810d