POWERMILL AND ROLAND JWX-10

[totxa]

Any one has a post for this please?
I´m triying to do a double side machining ..there is a roland post in the ducpost and it works when I move in 3 axis...but I dont know exactly how to make the 4 axis rotate 180 and mill again.

any help would be good $%& thankxxx friends

[ajaydevb]

I too looking for the same kind post processor for Mach3.

[ekashfi]

Hi.
For 3 axis machining you can use fanuc6m. But you should edit the begin of G-code. but for 4 axis or 5 axis you should have the Multi Axis Post-processor.
Also you could have a 3 axis post-processor so that the output G-code doesn't need to be edited.
I can write both of them ( 3axis & multiaxis ) for your machine.
For more detail contact:
E.kashfi@gmail.com
subject: Multiaxis

[ekashfi]

Any one has a post for this please?
I´m triying to do a double side machining ..there is a roland post in the ducpost and it works when I move in 3 axis...but I dont know exactly how to make the 4 axis rotate 180 and mill again.

any help would be good $%& thankxxx friends

Hi
in fact you need a 4 axis post processor for your machine.
Which type of Roland do you have?
I can write for any 4 axis or 5 axis machine its own post processor.
for more detail contact : e.kashfi@gmail.com subject: multi axis

[ekashfi]

I too looking for the same kind post processor for Mach3.

Do you need a 4 axis or 5 axis post-processor?

[ekashfi]

Hi.
you could create a new work plane and rotate it around your machine rotary axis. and do your 3axis machining in new direction. you should rotate the rotary axis manually. It called 3-2 machining. if you have a for axis post processor rotary axis codes will be appear in G-code and will not need too rotate manually.
Also it will be need for simultaneously 4 axis machining.
for more detail send your exact request to E.kashfi@gmail.com.

[ekashfi]

Do you need a 3 axis post-processor or 4 axis or 5 axis?