Post Processor for Shoda NC516

[zelaznog]

Hello,
does anyone has a post processor for Shoda NC516?
thanks

[white.crow]

yes

[zelaznog]

yes

Hello White.Crow!!
Do you know about Post processors for MC?
I create one for my Shoda, but I have to edit my programs.

My machine has 8 spindles; T1 uses G54 X0, T2 uses G55 X0, T3 G56 X0, T4 G57 X0 these are spindles for cutters and or profiles...
...T5 uses G54 X-8.5, T6 uses G55 X-8.5, T7 uses G56 X-8.5 and T8 uses G57 X-8.5
What do I have to change in my post processor to get the propper work coordinate and the X values for the tools 5,6,7 and 8?
thanks

[white.crow]

what is it that you have to change/edit?

[zelaznog]

what is it that you have to change/edit?

Hello White.Crow,
As I mentioned, when I use T5 the NC program must give me G52X-8.5, if I use T1 I want G52X0...

Thanks