MX2 Post

[Partsmaker]

I'm looking for MX2 post that will work with my Mori AL-2 with Yasnac LX1 control, anybody got any ideas?

[Superman]

3 options available

1/ try all generic posts supplied with mastercam, select the closest and then modify that post to suit your machine. Any assistance in modifying your post would be willingly given by many through this forum, ( also try the mastercam forum for assistance )
2/ see your mastercam rep
3/ go back to 1/

Remember both forums -- the cardinal rule -- please , don't ask for a post

[Partsmaker]

Thanks, I tried the generic posts and found one thats close,needs some modifying to make it work though. That part is a little over my head.

[g-codeguy]

Thanks, I tried the generic posts and found one thats close,needs some modifying to make it work though. That part is a little over my head.

As already suggested, try www.emastercam.com There are many on that forum who really know their stuff. Best part is they are more than willing to help, provided you give enough information so they can. Also as previously mentioned, don't ask for a post. Let them know what needs to be changed, and I'm 100% positive that someone there can help you.

I can give a little advice if I know exactly what is being output, and what you want it changed to, but have to admit that I am a babe in the woods compared to most of those guys.

[Partsmaker]

Thanks alot! I'm going to play around with it today. will let you know.