The standard Heidenhain 3axis post in mastercam X3

[Viperia]

Hello!

I previusly had a standard installation of MasterCam X3 working on my computer and it came with a default post processor for Heidenhain iTNC 530 3-Axis but yesterday i reinstalled my computer and also MasterCam but when i started MasterCam up it does not exist an postprocessor for HeidenHain at all.

I cant remember how i got it but everyone i talk with say it is a standard post processor that comes with all installs of Mastercam X3 just as the default Fanuc posts etc. But i find it od that i dont have them.

Is there anyone here that have the files in metric that can send them to me or tell me how to get hold of them fast and easy?

Regards,
Viperia

[tobyaxis]

There should be a Post for you on the disk that the software cam with as I have read many times.

Have you tried the Download area on Mastercams Official Web Page??

You can also try the eMastercam Forum or wait for a more experienced individual to help you here. LOL that excludes me

http://www.mastercam.com/Support/Downloads/Default.aspx

http://www.emastercam.com/cgi-bin/ul...cgi?category=1

[Superman]

Mastercam install setup page should have individual install check boxes
You have installed Mastercam, but missed a check box for posts

ie
>Mastercam install
>Help files
>Samples- in english or metric
>Posts
etc

place your disk in - run setup and you should be able to modify your install selections, very similar to "Add/Remove Window Components" in Windows

[0aleksandar1]

MIKRON VCE 1000 PRO-x
DMC 1035 V DECKEL MAHO
Posts for MasterCam X3
PLEASE HELP!!!

0eraser1@gmail.com