| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-13-2009, 07:31 AM
| |||
| |||
Good Morning Gentlemen, I am editing the generic fanuc 5x mill post and my angles are slighty wrong. First, let me explain my setup. We have a 4th axis (B axis) mounted on the X plus (right, when facing machine) side of the table. The 4th axis is limited on travel. When facing machine, the B axis can move away from operator to B+90 and towards operator B-120. My problem is when I program to rotate to B-90 it posts out B+270. Theoretically, this is the same position but with my limits I can't rotate 3/4 turn. Thanks for any and all your help.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Rookie Question...3 axis vs 4 axis controller | Ferrari2007 | DIY-CNC Router Table Machines | 3 | 09-13-2009 08:04 PM |
| New Machine Build- post for 2 axis ez trak versus 3 axis ez vision | tooolman | G-Code Programing | 0 | 11-28-2008 03:33 PM |
| Question about Z Axis | jfunk56 | DIY-CNC Router Table Machines | 2 | 05-03-2008 08:10 AM |
| | |
Linear Mode
