help for ppost processor

[Juanito]

Hi guys i'm new here and don't know where post my question
i'm looking for help how to edit a post for a DMG 1035
or if somebody have already the post. programing whit mcx2
Thanks Guys
aless2010@yahoo.ca

[cncdeckel]

Hi guys! first post here! Anyone got a working post or help to edit a post for a DMG 1035..?
tank'S!

[txcncman]

What MasterCam version are you working with? What post are you using now? Upload a copy of the post with a current program output and a copy of the same program with corrections. Then someone can help you modify the post.

[cncdeckel]

ok tanks for the details!
i am now running mastercam X2.
I didnt post a program yet on the DMG because its not finish leveling and pluging ect.
But im posting on a charmille robofil Wire Edm too, and i have to modify manualy my program too..so i figured out that it will be the same for the DMG..!

[cncdeckel]

exemple of the before/after pots on the robofil:
(using post MPWFANUC.PST)

<<original posting<<
O0001
N100 G0 G20 G90
N110 G92 X-.11328 Y-.06487 I1. J0.
N120 G0 X-.11328 Y-.06487
N130 M60
N140 M35
N150 M81
N160 S101 D1
N170 G42 G1 X-.06328
N180 Y-.01487
N190 G2 X.06328 I.06328 J.01487
N200 G1 Y-.06487
N210 X.11328
N220 G40 Y-.16487
N230 M50
N240 G0 X-.11328 Y-.06487
N250 M60
N260 G42 G1 X-.0735
N270 Y-.0309
N280 G2 X.0735 I.0735 J.0149
N290 G1 Y-.065
N300 G01 G40 X.115
N320 M50
N330 M30
%


AFTER:

%
O2706
(COMMENTS)
N130 M24
N140 M27
N150 M28
N160 G90 G92 X-.115 Y-.065
N170 G01 G42 D0 X-.06328
N180 Y-.01487
N190 G2 X.06328 I.06328 J.01487
N200 G1 Y-.065
N210 G01 G40 X.115
N220 G90 G00 X-.115
N260 G01 G42 D0 X-.0735
N270 Y-.0309
N280 G2 X.0735 I.0735 J.0149
N290 G1 Y-.065
N300 G01 G40 X.115
N310 G90 G00 X-.115
N330 M99
%

It is juste the begening and the end that i have the most change...
Is it clear?

I dont even know for now witch post to use on the siemen DMG control...i will see later
THANKS

[txcncman]

DMG is going to come with either a Seimens or a Heidenhain control. I would hope by now you would know which one.

Seems the X and Y numbers in your 2 sample programs do not match. Are you sure this was a before and after?

[cncdeckel]

yeah the siemen one but,
i dont even have a generic mill post for the siemen control...

[txcncman]

Here are a few of the changes you wanted. I have not located in the post processor where it inserts most of the M-codes you want removed. Look in the post for "(Changed 06/27/12)" to see what has been changed.

As I mentioned before, the X and Y numbers do not match exactly between your two sample programs.

[cncdeckel]

Here are a few of the changes you wanted. I have not located in the post processor where it inserts most of the M-codes you want removed. Look in the post for "(Changed 06/27/12)" to see what has been changed.

As I mentioned before, the X and Y numbers do not match exactly between your two sample programs.

Yeah my fault, i manually changed them..
tank's! i'll check that

Do you know where i can download a generic mill post for siemen control..?

[cncdeckel]

Wow almost there! Great job, But not perfect...
i put the change i want:

O0001
N100 M24
N110 M27
N120 M28
N130 G92 X-.13945 Y-.05998 I1. J0. <<<leave G92 but include G90 (like G90 G92 x... y...)<<<<
N140 G0 X-.13945 Y-.05998 <<<< dont want this<<<
N150 M60 <<<<<dont want this<<<
N160 M35 <<<dont want this<<<
N170 M81 <<<dont want this<<<
N180 S101 D1 <<<dont want this<<<
N190 G42 G1 X-.06676 <<<Put a D0 after the G41<<<<
N200 Y-.04998
N210 Y-.03997
N220 Y-.02997
N230 Y-.01997
N240 Y-.00996
N250 G2 X-.06686 Y.00931 I.06676 J.00996
N260 X-.0615 Y.02782 I.06686 J-.00931
N270 X-.05113 Y.04407 I.0615 J-.02782
N280 X-.03659 Y.05672 I.05113 J-.04407
N290 X-.01907 Y.06475 I.03659 J-.05672
N300 X0. Y.0675 I.01907 J-.06475
N310 X.01907 Y.06475 J-.0675
N320 X.03659 Y.05672 I-.01907 J-.06475
N330 X.05113 Y.04407 I-.03659 J-.05672
N340 X.0615 Y.02782 I-.05113 J-.04407
N350 X.06686 Y.00931 I-.0615 J-.02782
N360 X.06676 Y-.00996 I-.06686 J-.00931
N370 G1 Y-.01997
N380 Y-.02997
N390 Y-.03997
N400 Y-.04998
N410 Y-.05998
N420 X.13945
N430 G40 Y-.15998
N440 M50 <<<dont want this<<<<
N450 M99
%


TANK YOU VERRRYY MUTCH!!!

[txcncman]

Here is a Siemens post. I do not know how well it works since I have never done any programming for a mill with a Siemens control. You are welcome to it though.

I do not know when I will get back to looking at your post again. Maybe someone else will look at it sooner.

[cncdeckel]

Here is a Siemens post. I do not know how well it works since I have never done any programming for a mill with a Siemens control. You are welcome to it though.

I do not know when I will get back to looking at your post again. Maybe someone else will look at it sooner.

tank you very mutch! i apreciate what you've done!