Need Help!- Trying to make an Postprocessor for iTNC 530 / Hermle b 300 5 Axis machine

[Viperia]

Hello!

A couple of days ago i was placed at a new machine at work which is a 5-axis Hermle B300 machine with iTNC 530 and it is a really cool machine that can make lots of nice things.

The problem is that at the company i work with does not have any cam programs like mastercam/edgecam etc but i have a license on my own computer from a earlier employer that i could keep.

So now i want to try to use my own mastercam and computer to generate some nice nc-programs to show my current employers how much mastercam would help us and make the work faster, higher quality etc so that they will get us a couple of mastercam licenses.

The problem is that in my mastercam i have only some default post processor for Fanuc and none for Heidenhein at all which was to bad. My plan was to use a default Heidenhein postprocessor and then edit it a bit to work as good as possible with my Hermle machine.

Anyone have an default Heidenhein postprocessor that is working good with Mastercam X2 V11 that they can share? If it works with an 5 axis machine it would be awesome!

Or if someone could point me in the right direction to create a new and working post processor for this 5 axis machine it would be highly appreciated!

Sorry if the english is a bit bad but im Swedish.

Regards,
Viperia

[Daniel_Harris]

You can contact www.camaix.net and get a 30 day trial of their post-processor

[Mike Mattera]

Hi Danny,

Mike Mattera here (formerly of Shopware).
How's the world treating you.

Mike Mattera