Ultimax 3

[Nong Noy]

Hi everyone

I get 2 problems with ultimax 3 for Hurco BMC 25:
I'm mastercam X2 user.

1. My pst fil posts something I don't want to. I get some extra sequence or N nr. In this sample sequence nr. N65 and N195 and more will post if program from Masercam is longer. How do I remove this issue in my post processor?

2. There are empty sequences. How do I remove them in post processor. It isn't a problem when I run 2D program, but it comes to surfaces programing, there are a lot of these. They don't have any act. It just make a program longer and no necessary.

%
N5 G71 G75 G90
N10 G0 T17 M6
N15 G0 X-85. Y-24.998
N20 S477 M3
N25 Z25.
N30 Z2.
N35 G1 Z.2 F570
N40 X176.5 F500
N45 G3 Y24.998 I176.5 J0. F125
N50 G1 X-85. F500
N55 G0 Z25.
N60
N65 Y-24.998 N65 Z2.
N70 G1 Z0. F570
N75 X176.5 F500
N80 G3 Y24.998 I176.5 J0. F125
N85 G1 X-85. F500
N90 G0 Z25.
/M0
N95
N100 M5
N105 G0 M25
N110 G0 T14 M6
N115 G0 X76.75 Y-55.2 M08
N120 S2500 M3
N125 X76.75 Y-55.2
N130 Z25. M08
N135 Z2.
N140 G1 Z-22.75 F2500
N145 G41 Y-50.2 F1000
N150 G3 X66.75 Y-40.2 I66.75 J-50.2 F125
N155 G1 X0. F1000
N160 G2 Y40.2 I0. J0. F751
N165 G1 X151.5 F1000
N170 G2 Y-40.2 I151.5 J0. F751
N175 G1 X66.25 F1000
N180 G3 X56.25 Y-50.2 I66.25 J-50.2 F125
N185 G40 G1 Y-55.2 F1000
N190 G0 Z25.
N195 X76.75 Y-50.2 N195
N200 Z2.
N205 G1 Z-22.75 F2500
N210 G41 Y-45.2 F1000
N215 G3 X66.75 Y-35.2 I66.75 J-45.2 F125
N220 G1 X0. F1000
N225 G2 Y35.2 I0. J0. F716
N230 G1 X151.5 F1000
N235 G2 Y-35.2 I151.5 J0. F716
N240 G1 X66.25 F1000
N245 G3 X56.25 Y-45.2 I66.25 J-45.2 F125
N250 G40 G1 Y-50.2 F1000
N255 G0 Z25.
N260
N265 M09
N270 M5
N275 G0 M25
N280 M2
E

I hobe you guys can help me with these?

[beartrax]

I'm having the same issue as above using MCX2 for our Hurco's. Just started using it. Is no one else in the world having this issue? Does no one have any idaes execpt"contact your reseller"? Our company has multiple brands of cnc's and it isn't feasible to program the same part multiple times. Please, we need some help soon!
Richard Garrett