Charmilles post-processor

[Molay]

Hello

I have a problem with Mastercam X post-processor...

I have got a Charmilles wire machine (240 SL).

When I process the file, if i have to make a double wirepath contour (1srt cut + tab cut)... the iso file doesn't put another electrical conditions between this 2 cuts and it should be.

How can I modify the post?

[Steve Arteman]

This can be a complex problem I have done a few posts for this machines and you don't know until you look. Send me your post and machine and control def with the part I will look to see if it is something simple but doubt it. a zip to go file will work better if you know how to do this. send to steve@cad2cam.net
Steve
www.cad2cam.net