| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-22-2007, 07:30 AM
| |||
| |||
hi all, i'm just bought a machine called DMC63V... but i dont have the post processor for it... it's for educational purpose, cause i'm teaching a highschool student...and they wanna see the machine run...but i can't withaout the post processor... if anyone can help me please email me at sonnybiker@yahoo.com thanks alot...  |
|
#2
11-22-2007, 12:37 PM
| ||||
| ||||
| Contact Mastercam education as they have posts for schools. they can be found on the main mastercam website. http://www.mastercam.com/TeachersStu...r/Default.aspx
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |
|
#3
11-23-2007, 09:17 AM
| |||
| |||
btw...thanks for the info Best regards |
|
#4
11-23-2007, 10:12 PM
| ||||
| ||||
| You need to get the phone number for education and call them and talk to the education Post guy they will help the schools.
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need to replace Dynapath 20 control with new control | Cycle Start | Knee Vertical Mills | 3 | 08-08-2010 03:14 PM |
| Using Flashcut CNC Spindle rotate card control to control laser power | pyroplotter | FlashCut CNC | 0 | 10-15-2007 09:46 PM |
| Torch Height Control / Capacitive Height Control | ahlbebuck | Open Source Controller Boards | 0 | 11-27-2006 01:32 PM |
| BobCADCAM Layer Control / Snap Control | jonbanquer | BobCad-Cam | 0 | 01-21-2006 03:10 PM |
| Change - from linear path control to CNC path control | fidibus42 | General Electronics Discussion | 1 | 12-04-2005 10:43 AM |
| | |
need help for DMC63V with siemens810 control 
Linear Mode
