| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
02-12-2007, 08:33 PM
| ||||
| ||||
| If you want to e-mail my a copy of your post I can take a look at it for you.
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)    |
|
#3
02-12-2007, 09:24 PM
| |||
| |||
| Thank you in advance. As I don't know your e-mail I have posted it here. Any direction you could point me in would be very helpful. Thanks in advance Les Here it is in text format. Thanks in advance. Last edited by lab73; 02-12-2007 at 10:04 PM. |
|
#4
02-12-2007, 09:43 PM
| ||||
| ||||
| Please repost the file as a text file. I can help you with this.
__________________ ObrienDave. MasterCam since V6. Gcode since 1983. Be careful, the nose you punch today may belong to the butt you have to kiss tomorrow. |
|
#5
02-12-2007, 10:09 PM
| |||
| |||
| I got rid of those lines without altering my post......However I'm having one other problem N108 G43 H0 Z4.7005 I'm wondering where the setting would be for changing H0 to H1? Also the settings I've changed is this something I'm going to have to do evrytime? Thanxs in advance Les |
| Sponsored Links |
| |
|
#7
02-14-2007, 02:34 PM
| ||||
| ||||
| Look at the PSOF section to see how I removed the 3 lines.
__________________ ObrienDave. MasterCam since V6. Gcode since 1983. Be careful, the nose you punch today may belong to the butt you have to kiss tomorrow. |
|
#9
02-14-2007, 10:58 PM
| ||||
| ||||
| Change the file extension from .txt to .pst and place in the Mcamx\Mill\Posts folder. Be sure to save your original somewhere else. Your welcome.
__________________ ObrienDave. MasterCam since V6. Gcode since 1983. Be careful, the nose you punch today may belong to the butt you have to kiss tomorrow. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need help with Mastercam v9.1 generic mill post (mpfan) g54-s | gasho | Post Processor Files | 3 | 07-09-2007 03:39 PM |
| Rotary post issued, based on MPFAN | soundqsho | Post Processors for MC | 2 | 02-26-2007 12:59 PM |
| V9 MPFAN post mod. | COPO427 | Mastercam | 10 | 07-15-2005 10:52 AM |
| Modify Mastercam MPFAN post | COPO427 | Mastercam | 15 | 05-26-2004 12:59 PM |
| | |
Linear Mode
