Okuma LB-15 Post

[dmealer]

Hello,
Does anyone have a post processor for a Okuma LB-15 lathe with the osp5000L-G control for MCX?
I have worked out all the bugs save 2 items. My threading cycle comes out as a G32 when I need a G34 and the feedrate come out as a E value instead of a F value. It gets the actual feedrate right, it just puts the wrong letter in front of it.


Thanks
D.Mealer

[Steve Arteman]

D.
go file edit/open, lathe , post. go into the post search for this"String for address F" Change the "F" to a "E" then search in the post and find G32 and change that to a G34 there should be 2 listed to together. this should do it.