Drilling section for Biesse Rover

[NWind]

I'm trying to write postprocessor for Biesse Rover B4.35 (4-Axis machining center with NC1000) and have some troubles...
First of all, NC file have sections - optimized drillings, labels sections, stock parameters and so on. And section where pointed starts of sections in bytes from start of file, otherwise "Label management error" occured.
And how can I extract drilling operations to separate section?
Example NC file attached.
Thanks.

[NWind]

Hi again. Looks like problem had been resolved, but I'm not sure that it's right way. I'm just testing tool type and omit any output if it is a drill tool. Instead of this I take x,y,z,depth & diameter of tool and form string for drilling section and store it in separate string variable.
It's not looking good, but it's work.
Another bad thing - its unusual Z axis - inversed axis. I.t. I must set tool/construction plane to BOTTOM. But engraving not working with this plane!!!

[gwoody]

If someone could please help me out with this we got a new m achine in and i would like to try and get it running.We got it from another company that closed and no info on it.Anything will help out.Machine is nc 1000 cont.

[NWind]

Can you post example of NC file and characteristics of machine?

[gwoody]

Here is a program that I have gotten off the machine.Thanks for any help you or anyone can give.

[COMMENTO]

[CENTRO01]
PARAMETRI=000000208
UTENSILI=000000362
LABELF=000000577
LABELC=000000564
FORATURA=000000531
CONTORNATURA=000000381
TABELLEFORI=000000546
CONFASSIST=000000590
ATTREZZAGGIO=000000607
[PARAMETRI01]
N10 G71 HC=1 LY=533.4 PLPZ=25.4 PDM=0 PUOS=0 FIL=0 BLO=0 ACC=0 RUO=0 PRS=1 PRL=1 LZ=(PLPZ+PCSG) PPWQ=0.000 KA=0.000 PVER=1.000 LX=1320.8
%
[UTENSILI01]
3/8
%
[CONTORNATURA01]
N20 PAN=1 ST1="3/8" ST2="NULL" ST3="NULL" L=PCUA
N79 XO171.45 YO63.5 L=C2.5B G0
N79 XO1149.35 L=C2.5B G0
N79 XO0 YO0 G0
N80 L=POFF
%
[FORATURA01]
%
[TABELLEFORI01]
%
[LABELC01]
%
[LABELF01]
%
[CONFASSIST01]
%
[ATTREZZAGGIO01]
%
[]

[NWind]

Looks like it's the same code that we have in B4.35, but we haven't subroutines like "L=C2.B"... It's standart subroutine? Any way, my post is...
1. ...for MCX
2. ...NOT support engraving, horizontal drilling and aggregates yet.

But it suit pretty well for needs of our furniture factory.

[gwoody]

Wish i had something great like that to get me started.Or even some books about the nc 1000 controller and how to make post for it in mc

[NWind]

Ok, send me your email. May be I can help you with nc1000. You prefer russian on english version?

[cncrover37]

hi i know its been a while since your last posts but did you find the solutions to the problems you have been having?? or the information that you were after?

[badsousa]

Originally Posted by gwoody Here is a program that I have gotten off the machine.Thanks for any help you or anyone can give. [COMMENTO] [CENTRO01] PARAMETRI=000000208 UTENSILI=000000362 LABELF=000000577 LABELC=000000564 FORATURA=000000531 CONTORNATURA=000000381 TABELLEFORI=000000546 CONFASSIST=000000590 ATTREZZAGGIO=000000607 [PARAMETRI01] N10 G71 HC=1 LY=533.4 PLPZ=25.4 PDM=0 PUOS=0 FIL=0 BLO=0 ACC=0 RUO=0 PRS=1 PRL=1 LZ=(PLPZ+PCSG) PPWQ=0.000 KA=0.000 PVER=1.000 LX=1320.8 % [UTENSILI01] 3/8 % [CONTORNATURA01] N20 PAN=1 ST1="3/8" ST2="NULL" ST3="NULL" L=PCUA N79 XO171.45 YO63.5 L=C2.5B G0 N79 XO1149.35 L=C2.5B G0 N79 XO0 YO0 G0 N80 L=POFF % [FORATURA01] % [TABELLEFORI01] % [LABELC01] % [LABELF01] % [CONFASSIST01] % [ATTREZZAGGIO01] % []

hello, would also like to get this post precess, where can I dowload

Please

[badsousa]

Originally Posted by NWind I'm trying to write postprocessor for Biesse Rover B4.35 (4-Axis machining center with NC1000) and have some troubles... First of all, NC file have sections - optimized drillings, labels sections, stock parameters and so on. And section where pointed starts of sections in bytes from start of file, otherwise "Label management error" occured. And how can I extract drilling operations to separate section? Example NC file attached. Thanks.

hello, would also like to get this post precess, where can I dowload

Please