LinkBack URL
About LinkBacks
I would put a copy of the post processor in the appropriate folder (lathe, mill, etc.). Then you can link the new post processor to the appropriate machine definition in the machine definition manager.
| | |
Hello,
Would you provide the procedure of how to upload a post processor?
I would put a copy of the post processor in the appropriate folder (lathe, mill, etc.). Then you can link the new post processor to the appropriate machine definition in the machine definition manager.
http://www.kirkcon.com/
Thats exactly where I'm having trouble with ... How can I likn that new post processor?
Start Machine Definition Manager
Open machine to add post processor to
Edit Control Definition
Click on Post Processors button
Click on Add files button
Navigate folders to new post processor file
Click OK to get back to Control Definition Manager
Highlight the new post processor in drop down list
Save
Click OK to get back to Machine definition Manager
Make sure new post processor shows in drop down list box
Save
Close Machine Definition Manager
http://www.kirkcon.com/
Posting Permissions
| | |
