Need Help! canned text option - question - CNCzone.com-The Largest Machinist Community on the net!

sdrc71 · #1 02-01-2012, 07:42 AM

Hi friends,

I added 2 specials Canned cycle codes on my post but for some reason the codes came out show M11 or M12 instead codes I want. I just wonder where is I can set define the M11 = G65P1901...on the post.
thank you,
Trang,

[CTRL_MT_MILL|GENERIC FANUC 2X LATHE]
[misc integers]
1. "Work Pos. [-1=REF,0=G50,1=HOME,2=G54s]"//2
2. "Abs/Inc. [0=ABS, 1=INC]"
3. "Ref. Return [0=G28,1=G30]"
4. "Mill Cyc G107/G112 [0=OFF,1/-1=ON]"
[simple drill]
1. "Drill/Counterbore"
7. ""
8. ""
9. ""
10. ""
11. ""
[peck drill]
10. ""
11. ""
[chip break]
11. ""
[tap]
7. ""
8. ""
9. ""
10. ""
11. ""
[bore1]
1. "Bore #1 "
7. ""
8. ""
9. ""
10. ""
11. ""
[bore2]
7. ""
8. ""
9. ""
10. ""
11. ""
[misc1]
7. ""
8. ""
9. ""
10. ""
[canned text]
1. "Program Stop"
2. "Optional Stop"
3. "Block Delete on"
4. "Block Delete off"
5. "Return Tailstock"
6. "Advance Tailstock"
7. "Return Chute"
8. "Advance Chute"
9. "Exact Stop on"
10. "Exact Stop off"
11. "G65P9101"
12. "G65P9106"

sdrc71 · #2 02-07-2012, 06:52 PM

got it!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Option for V-Carve Text, Not a new software.	Nils	Product Announcements & Manufacturer News	21	09-26-2011 07:45 PM
Need Help!- Okuma canned cycle for text??	medman	Okuma	2	04-29-2010 06:02 PM
Customizing Canned Text?	Donkey Hotey	Mastercam	6	11-15-2008 02:35 PM
Using Canned Text to enable Block Delete	Bloodeye	Mastercam	1	05-26-2008 10:18 AM
Error when using text option	jeffrm20	GibbsCAM	6	01-05-2006 07:50 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)