Mach3 postprocessor for Mastercam X6

[rdpdo]

Hi,

Anyone have this please ?

Thanks !

[makezilla]

Did you ever get a MACH3 post for Mastercam X6?

[Dougwar]

Hi,

Anyone have this please ?

Thanks !

go to mach3 website
there have one

[patrick1234]

Hi does anyone have a post for a 1989 yasnac lx3 controer for my lathe?

[txcncman]

Ok, if you have X6 it can be assumed you recently acquired it and should have support from your source. Contact your rep.

[Robert M]

Hi all....
I've been working before w/ MC-X4 with the Mach3 postprocessor without any trouble ( aside of some code 18 )....

Now I've updated to MC-X6 with the available postprocessor ( same from mach 3 since many moons, same I had in on my old MC-X4) it seems not working for me...AND YES, I've updated the post through mastercam addin updater ( UpdatePost.dll)...

I'm getting some odd patterns out of it.
Same file tested on my old computer with same Mach3 and w/MC-X4 is fine.....

Can anyone come to my rescue ??
Any thoughts ?
Thanks, Robert

PS....I've also tried the MC-X6 generic post (generic fanuc 3x router), and same trouble....maybe my Mach3 set up ??
Mach-3 version : 3.042.040 on Windows 7 ??

[txcncman]

Maybe your machine definition is incorrect?

[Superman]

Is your CNC_machine file pointing to the X6 updated files ?
or to the old X4 post

sometimes when upgrading versions, it tends to hang onto the previous CNC machines that have the previous posts, until you actually re-select the latest

I think you may have to update the machine definition (MD) & control defin (CD) files as well .... check 1st

[Robert M]

Thanks txcncman & Superman !
In deed, my machine definition need some....help !
PLUS.....some mistake in resetting my Mach 3 didn't help !
So many thing to reset when formatting and upgrading !!
I had a doubt moment about X6 with mach 3 in win7
All seem fine now !

[Robert M]

James5544
Anything after your ( ? ) is not showing !!!??
What is it your looking after, requesting ?

[Andrey67]

Try this post.

MACH_3B__X6.rar

[Robert M]

Thanks Andrey67,
Although I've been ok since my fix, I'll try your later and give some news !
Later, Robrert