Need Fagor 8025 post for MC X3

[cmacclel]

Any help would be appreciated.

Thanks

[txcncman]

Did you check this thread? http://www.cnczone.com/forums/post_p...gor_8055m.html

Also here: http://www.cnczone.com/forums/post_p...ercam_8_a.html

There is one for X5 here: Mastercam : Teachers & Students

I have found some of the X5 post are backward compatible.

[Superman]

Originally Posted by txcncman I have found some of the X5 post are backward compatible.

I would NOT assume that it would work correctly for you,
( some items may work, but it will bite you hard with a machine crash )
- many parameters are altered with each release and the post is updated to suit these new parameters etc

Never have I seen a REVERTPOST chook to take it back it to an older version of Mcam.

So my advice is to find the same version PST, or update an earlier version to the level you need