hello everyone I am looking for a post to my seibu wire edm machine. I am currently using a fanuc post that I found in mastercam wire 7.2, but I have lots of problems. For example my machine doesn't allow dots(.) so in every bloc I have to erase them. And where I have I2. ( for exampe) J0. ( in post where I or J are 0 the post doesn't put them at all) I Change it to be- I2000 J000 and that worries me because I can make a mistake very easily. 2 days ago I lost a customer because I messed something up in the post.... if anybody can help I would be grateful. Here's what my post looks like


before:

O0000
N100 G0 G20 G91
N102 G92 I1. J0.
N104 M60
N106 S101 D1
N108 G1 G50 Y4.5
N110 G3 X-.5 Y-.028 J-4.5
N112 X5. Y-4.472 I.5 J-4.472
N114 X-4. Y4.472 I-4.5
N116 X-.5 Y.028 I-.5 J-4.472
N118 G1 Y-4.5
N120 M50
N122 M30
%

after:

W001
N108 G1 G41 Y4500
N110 G3 X-500 Y-028 I000 J-4500
N112 X5000 Y-4472 I500 J-4472
N114 X-4000 Y4472 I-4500 J000 M01
N116 X-500 Y028 I-500 J-4472
N117 G3 X-500 Y-028 I000 J-4500
N118 G1 Y-4500
N119 X500 Y028 G40
N120 M02

It's in millimeters. PLEASE HELP