HOW TO PUT COMMENT INTO POSTBLOCK AREA ?

[lukasz24]

THIS IS HOW IT POSTS RIGHT NOW

O1234 ( TEST )
( CREATED ON 05-03-11 AT 8:40 AM )
( MCX FILE - E:\MCX\PRATT & WHITNEY\ RIGHT\ OP 40 RIGHT - COPY.MCX-5 )
( NC FILE - C:\USERS\LUKAS.\DOCUMENTS\MY MCAMX5\MILL\NC\TEST.NC )
( MATERIAL - ALUMINUM INCH - 2024 )
( T1 | 5/8 FLAT ENDMILL | H1 | D1 | WEAR COMP |0.625 )
( T2 | 1.5" FACE MILL | H2 | D2 | WEAR COMP |1.5 | XY STOCK TO LEAVE - 0. | Z STOCK TO LEAVE - .02 )
G20
G0 G17 G40 G49 G80 G90 H0 E0 Z0
T1 M6
( 2.3 STICK OUT , 1.625 LOC , GRIND THE SHANK )
( 5/8 FLAT ENDMILL TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA - 0.625 )
G0 G90 S580 M3 E1 X-.7852 Y-4.0855
H1 Z6. M8 T2
.................
...........
T2 M6
( SYIC-22709-4 STELLRAM , STICK OUT 4.4 )
( 1.5" FACE MILL TOOL - 2 DIA. OFF. - 2 LEN. - 2 DIA - 1.5 )
G0 G90 S650 M3 E1 X-5.6503 Y-1.8449
H2 Z4. M8 T3
.....................
..................
M30

... BUT I WOULD LIKE TO POST LIKE THIS



O1234 ( TEST )
( CREATED ON 05-03-11 AT 8:40 AM )
( MCX FILE - E:\MCX\PRATT & WHITNEY\ RIGHT\ OP 40 RIGHT - COPY.MCX-5 )
( NC FILE - C:\USERS\LUKAS.\DOCUMENTS\MY MCAMX5\MILL\NC\TEST.NC )
( MATERIAL - ALUMINUM INCH - 2024 )
( T1 | 5/8 FLAT ENDMILL | H1 | D1 | WEAR COMP |0.625 | 2.3 STICK OUT , 1.625 LOC , GRIND THE SHANK )
( T2 | 1.5" FACE MILL | H2 | D2 | WEAR COMP |1.5 | XY STOCK TO LEAVE - 0. | Z STOCK TO LEAVE - .02 |
SYIC-22709-4 STELLRAM , STICK OUT 4.4 )

G20
G0 G17 G40 G49 G80 G90 H0 E0 Z0
T1 M6
( 5/8 FLAT ENDMILL TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA - 0.625 )
G0 G90 S580 M3 E1 X-.7852 Y-4.0855
H1 Z6. M8 T2
.................
...........
T2 M6
( 1.5" FACE MILL TOOL - 2 DIA. OFF. - 2 LEN. - 2 DIA - 1.5 )
G0 G90 S650 M3 E1 X-5.6503 Y-1.8449
H2 Z4. M8 T3
.....................
..................
M30

THANKS

[metlshpr]

Edit your tool that you want a "special" comment. Go to the parameters tab and in the tool name field add your comments.

[psychomill]

You're just trying to move this comment right?

( SYIC-22709-4 STELLRAM , STICK OUT 4.4 )

This is going to depend on post version and the type of post block being used for comments. If you know how to edit posts to some degree, you find one or more comment strings being used.

One thing to note, this can be somewhat challenging as in older posts, the string used was the same for Manual Entry and path comments.