Mastercam 5 axis router post repositioning problem

[reinhartdr]

I am trying to get my generic fanuc 5 axis router post to reposition back to zero before a tool path.

I am building a 5 axis waterjet with a tilted 45 degree head using mach3. I have changed the post for that but when it reaches the limits it repositions when I am cutting a countersink hole.
EX: It starts cut at 100 degrees and tries to go plus 360 degrees and has to reposition to finish cut.

I want it to start at 0 and go 360 for each tool path cut.

Any Help would be greatly appreciated.

[bostosh]

Have you solved this yet?
I understand the problem.

[reinhartdr]

No I haven't solved it yet. I have just been reversing the cut direction. If you know how to get it to reposition that would be great.

[chavez0101]

when you chain a circle you can move the start point. Right click the mouse over the Geo of the circle in the op manager and it will have a start point button. try that and see if that helps