Another Post Processor for Heidenhain TNC 360 to suit Mastercam X3 Thread!

[bptnc2500]

Hi All,

I have a Cincinatti Sabre 1000 VMC with a Heidenhain TNC 360 control (circa 1994). I am also trying to use Mastercam X3 to program it and can only find the Fanuc post processor in the options. Does anyone know where I can find a metric Heidenhain post processor to suit and what program file location do I put it in so I can see it in Mastercam.

Thanks in advance,

P

[plankman]

still looking for that post? I have one I got working in X3 that will post
drilling cycles all the way back to a TNC145 (1985).

Let me know, and I'll send it to you.

[KevinV_MEI]

My programmer found one on an old 9.x cd he had but it doesn't post the drilling cycles correctly, puts the peck/drill parameters before the tool call. Also misses the M3 on some tool changes.

[vbolhov]

I have a Cincinatti Arrow 750 VMC with a Heidenhain TNC 360 control (circa 1997). And I have post processor, metric for Mastercam X4.
If it is necessary for you write to me on mail vbolhov@inbox.lv