CHANGED MY POST NOW IT DOSNT WORK

[armcoracing]

Im running mastercam mill 9.1 using MPAN5300.PST(post processor) but ive edited my post processor now it dosnt work properly,can anyone using 9.1 copy and zip me the wording of the post so i can go through my post and see where ive gone wrong thanks.
Regards Adrian

[vwilmot]

I bet you now know this but its a good idea to backup your post before editing them. I hope this helps.

[armcoracing]

Many thanks for your help,i think it must be the post as tool comp dosnt work with an5300.pst,ive tried it on compensation type-control and wear and i cant get g40,g41 anyway thankyou for your help.
Regards Adrian