CNC ROUTER 346 PALETTE BIESSE - CNCzone.com-The Largest Machinist Community on the net!

badsousa · #1 12-09-2010, 06:05 AM

work on a CNC ROUTER 346 PALETTE BIESSE, someone has a post processor for the AlphaCam, I can change some programs on your PC (winXP) but for the program in the CNC machine introduces a character at the end of each line of programming.

fhelp me

ObrienDave · #2 12-09-2010, 08:10 AM

Attach a Zipped copy of your post file to a message and we will help you.

badsousa · #3 12-09-2010, 10:03 AM

Also the pos careens precess, is that this post processor can not do the drilling.

thanks

ObrienDave · #4 12-09-2010, 01:19 PM

Looks to me like the little "r" at the end of each line is put there by your editor.
Your posted file does not contain the "r"

badsousa · #5 12-09-2010, 01:25 PM

post processor file

ObrienDave · #6 12-09-2010, 01:49 PM

Sorry, this is NOT a MasterCam post file.
At least not a version I am aware of.

badsousa · #7 12-09-2010, 01:54 PM

is a post processor ALHPCAM, I had to change the extension to the site around the original extension (ASP).

ObrienDave · #8 12-09-2010, 02:06 PM

Try this forum,
General CNC (Mill and Lathe) Control Software (NC) - CNCzone.com
There seems to be quite a few AlphaCam users there.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- SW 2010 dimension palette	sambudy	Solidworks	0	02-26-2010 04:45 PM
Need Help Biesse Rover 13	Christiaan	CNC Machining Centers	9	04-19-2009 04:39 PM
Biesse	jeremy budgen	Commercial CNC Wood Routers	24	09-14-2008 01:37 AM
Anyone ever had palette misalignment problems?	Driftwood	General Metal Working Machines	3	12-11-2007 08:09 PM
Biesse	eng_semsem1980	Commercial CNC Wood Routers	0	07-26-2007 04:32 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)