Need Help!- Mcam 9.1 post for Fanuc 5T which to use or modify ?

[ED209]

I need to find or modify a current post to output for an old Fanuc 5T lathe control.

this machine uses G50 for tool offsets, trailing/leading zeros, no decimal point,
the tool post is on the operator side of machine, horizontal bed. The tool #'s use T11 for tool #1 offset #1.

%
N10 G50 X154744 Z6592
N50 T33
N60 G00 X52500 Z1000
N70 G00 Z0
N100 G01 Z-180000 F0140
N110 G01 X54000 F0150
N160 G01 Z-5000 F0100
N170 G00 X154744 Z6592
N175 T30
N180 M05
N190 M00

Where do I begin ?????.

Ed

[cadcam]

Start with the default post that came with V9.1. or use the MPmaster post has allot of controls built in. look thru the toggles there are allot.http://www.mastercam.us/mpmaster91sp2.exe

Also make sure when programming you are setting the planes and tools for bottom turret.

[ED209]

Thanks CADCAM I will do that. The mpmaster is for mill only correct.

[cadcam]

OH wait there is one for mill and lathe let me check the one I posted.