MCAM X POST EDITING

[zvizdic]

I need to edit mcam x post so it would do no points. For example


X1.2 Y2.3 = X12000 Y23000

any help wold be appreciated.

[zvizdic]

This works for X,Y and Z but not for Iand J.


#Default english/metric position format statements
fs2 1 0.7 0.6 #Decimal, absolute, 7 place, default for initialize (
fs2 2 0 4 4 0t #Decimal, absolute, 4/3 place
fs2 3 0.4 0.3d #Decimal, delta, 4/3 place
#Common format statements
fs2 4 1 0 1 0 #Integer, not leading
fs2 5 2 0 2 0l #Integer, force two leading
fs2 6 3 0 3 0l #Integer, force three leading
fs2 7 4 0 4 0l #Integer, force four leading
fs2 9 0.1 0.1 #Decimal, absolute, 1 place
fs2 10 0.2 0.2 #Decimal, absolute, 2 place
fs2 11 0.3 0.3 #Decimal, absolute, 3 place
fs2 12 0.4 0.4 #Decimal, absolute, 4 place
fs2 13 0.5 0.5 #Decimal, absolute, 5 place
fs2 14 0.3 0.3d #Decimal, delta, 3 place
fs2 15 0 1 1 0t #Decimal, absolute, 2/1 place
fs2 16 1 0 4 0t #Integer, forced output

fmt N 4 n$ #Sequence number
fmt X 2 xabs #X position output
fmt Y 2 yabs #Y position output
fmt Z 2 zabs #Z position output
fmt X 2 xinc #X position output
fmt Y 2 yinc #Y position output
fmt Z 2 zinc #Z position output
fmt A 2 cabs #C axis position
fmt A 2 cinc #C axis position
fmt A 2 indx_out #Index position
fmt R 2 rt_cinc #C axis position, G68
fmt I 2 i$ #Arc center description in X
fmt J 2 j$ #Arc center description in Y
fmt K 2 k$ #Arc center description in Z
fmt R 2 arcrad$ #Arc Radius
fmt K 2 kpitch #Pitch (K) value for Helical motion
fmt F 15 feed #Feedrate
fmt P 11 dwell$ #Dwell
fmt M 2 cantext$ #Canned text