Mastercam X3 post for Okuma Captain L470M - CNCzone.com-The Largest Machinist Community on the net!

09-30-2009, 01:38 PM

rothjl03

Join Date: Jan 2006

Location: United States

Posts: 1

Mastercam X3 post for Okuma Captain L470M

permalink

I am looking for a post for my Okuma Captain L470M that has C-Axis and live tooling. Not having much luck, any help would be greatly appreciated. I have the OSP7C.pst file which works okay with the C-axis but not for general X and Z moves.

Thanks,
Josh

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is Off HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MasterCAM post for Okuma OSP7000 Mill	freakneck	Post Processor Files	6	11-26-2010 11:13 AM
Tool Life Management on Okuma Captain Lathe?	Edster	Okuma	5	08-12-2010 01:00 PM
Okuma Captain L370 w/ LNS Bar feeder	nitemare	Okuma	3	02-17-2009 07:20 PM
Post for Mastercam X2 to suit Okuma OSP-200m	DigitalPho3nix	Post Processor Files	0	08-01-2008 04:42 AM
captain l470m post	kazmir44	Okuma	2	02-07-2008 06:43 AM

All times are GMT -5. The time now is 05:23 AM.