Hello all,

We have just started using Pro E / Pro NC
in our programming Dept and are off to a slow start.
We are looking for a post processor for one of our machines
to get started.We have played with the Gpost to make a post that output
line for line. If any one has a post to share that outputs G70 & G71 canned cycles it would be of great help.


Here is a list of the machine controls we have.

Lathes,

Mori Seiki 2axis Fanuc 16T

Puma 2axis Fanuc 0T

Puma 2axis Fanuc 21i

Mazak 2axis Fusion


Mills,

Mazak 4axis M 32 plus

Mori Seiki 4axis Fanuc 16M


Centers

Mazak Integrex 5axis 410 with matrix control

Mazak Integrex 5axis 650 with fusion control

Mazak Quick turns with C axis matrix control



Thanks