G72 Canned Cycle Experts

[Kincade]

Hi All,

Can someone show me the correct syntex to correct the following G72 issue.
I'm not sure if this should be an If, Else, EndIf Logic ore a CallMe Statment. Or What sequince it should be in.


A G0 should be on the first N1000 Block with only one X[V] or Z[H]
Next Block should read G1 with X[V] or Z[H]

here it is a coded out "Wrong Way".

N1

G53 X-2. Z-14.
T303
(TURN TOOL)
G0 G99
G97 S1069 M3
X5. Z4.

G0 X2.2
Z0.06
X1.44
G71 U0.05 R0.1
G71 P1000 Q1100 U0.01 W0 F0.012
N1000 G1 X0.5576 Z0 F0.012 This Block Not right.
G2 X1.02 Z-0.2313 I0 K-0.2313
G1 Z-1.0312
N1100 G0 X1.44
Z0.06
G0 X2.2 Z-1.0312
Z4.
X5.
G53 X-2. Z-14. M9
T300
M5
M30
%




I WOULD LIKE IT TO POST OUT WITH THE
FOLLOWING "Right Way" Example.

G71 U0.05 R0.1
G71 P1000 Q1100 U0.01 W0 F0.012
N1000 G0 X0.5576
G1 Z0
G2 X1.02 Z-0.2313 I0 K-0.2313
G1 Z-1.0312
N1100 X1.44



Thanks,

[cncparedes]

you can send me a copy of your post and I can make the changes for you. it would be much easier, and once the changes are made I can send back you you to try it ok please let me know

[Kincade]

Hi Cncparedes,

Here is my e-mail ~ kincade@precor.com

This post is for Surfcam application.

I appreciate it if you can help.

I will send it to you in notepad.

Thanks

Merrill