Need Heidenhain 426 ISO post for MasterCam v9 or MX

[ktk11]

Searching for post for a 3 axis gantry mill with a Heidenhain 426 control. Need it for 2D & 3D toolpaths in ISO. I am using MasterCam v9 & MX2. New to this site. Might take a bit to figure this out.

Ken

[PPDEV]

Greetings

please go to the following link and I will be glad to help you.

http://www.icam.com/html/products/form_bw.php