3 /5 axis post for Heidenhain in Cimatron

[pullo]

Hi everybody
I am looking for a heidenahin postprocessor for Cimatron. 3 or 5 axis.
In return I have a 3-axis post for Heidenhain 415 or 430 or 530i which I have
been writing for myself for the past 10 years.

Gracjan

[ngochieu]

Hi Gracjan!
I am sorry because I can't help you, I don't have any post-professors. But I really need a3-axis post for Heidenhain 415 or 410. Can you give me a post Heidenhain? I am looking forward to hearing from you! Thank yo very much!
My email address: vungochieu1612@yahoo.com

[xtc_bk]

dear Gracjan !!
i have aproblem with post 3 and 5 axits in haidenahin machine and 5 axits in funuc machine.if you have anythings which help me. can you share to me? i am using cimatron E software.I am looking forward to hearing from you! Thank yo very much!
chuxuantruong2008gmail.com

[jman6716]

Do you have a 5-axis post for a Deckel Mahu Heidenhain-i TNG-530 for Cimatron?

[xtc_bk]

i have found some data about post processor for CNC five axits.
1- you are able to use IMS' post. i am success with it.
2- you can write a your post by GPP or GPP2
success to you!