Hi all,

I've been playing with both GibbsCam & MasterCam in conjunction with an
Acroloc series 100 (aka M15) w/ a GN6mb and am trying to modify the posts for it.

Unfortunately I don't currently have any copy of any code written for
the machine to compare with. Gibbs's 'Post Haste' has a post template for
an unspecified Acroloc with this control but when I run test programs made
with it the speeds and tool changes don't work right, among other things.

This is the larger (better) Acroloc with the huge 4~5/8" dia tool holders.
I suspect Gibb's post template was for the smaller machines which may have
a different spindle system and possibly different code.

I just need some clean code that excercises the machine's functions
to determine whats wrong in the posts.

Thanks!