| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Post Processor Files Post your Sheetcam Post Processor Files here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-22-2008, 03:55 PM
| |||
| |||
| Looking for the correct post processor Hi All, I'm using sheetcam and looking for the correct post processor for my machine. Sorta new to this so I'll give as much info as possible. From the plasma machine I got these specs; Koike - D7 Cutting Tips Coordinate Drive Control System Type: LYNX System: 6D55181G04 Control/Amplifier: 6D55179G03 Using a Hypertherm Max200 Thanks, Tim    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
