I'm not a crooke, I just need a little help!

[impdesign]

It would appear to me after reading the replies in this forum that some people are under the impression that when you ask for a post here you are trying to steal it. I have had a post from Mastercam before and it was crap! Why pay Mastercam's over inflated price when you can pay some one with a better working knowledge of pc programming. More often then not some has a modified post that has all the bugs worked out. Besides Mastercam is not always that great to work with.
I'm not trying to judge anyone, I'm just asking for a little forethought. I would gladly pay for a working post.
Please understand that email is often misread, and I mean no offence. (Mastercam 9 post for vm1)

[tobyaxis]

Try these guys

cadcam
Mike Mattera
Matt Berube

If you send them a PM and are able to supply them with a legal SIM # they should be more than willing to work with you. Heck they will help you in this Forum so you can learn how to do it yourself.

http://cnczone.com/forums/forumdisplay.php?f=27

Cheers!!!!!!

[impdesign]

Thanks, I'll give it a go

[tobyaxis]

I hope you get the help you need

[tobyaxis]

Have you received any help with your Post Processor???

[impdesign]

Hey thanks for all your leads,
A good friend came for a visit and help me out.
This is a great site, glade I signed up.

[tobyaxis]

Originally Posted by impdesign Hey thanks for all your leads, A good friend came for a visit and help me out. This is a great site, glade I signed up.

This is the Largest Help Forum on the net LOL. It covers everything in Manufacturing from CAD Design, CAM, Machines, Electronics, DIY CNC's and a whole lot more.

Glad you got the help you needed.

Cheers!!!!

[TJSTOOL]

IM GOOD FOR 3 AXIS NO PROBLEM (FANUS HAAS YASNEC OR CONTROLE CLOSE TO THAT )UNLESS IT GET HAIRY___ CHEEP NO BS V9 RIGHT