Fanuc tool height offset H~

[hkelsey]

In a generic 4 axis fanuc post for mastercam, where do you change the post so it will post an H offset number the same as the tool number T. For example I see tool T3 shows an H0 instead of an H3. With H0, the tool height offset is 0. I want H3.

Currently I go through the NC file and change H0 to H3 manually.

[joecnc1234]

When you create your operations their is a length offset box on the first page input the number their. in job setup check the box for length offset and tool offset it says tool offset registers and boxes add or from tool click add than in the length set it to 0.
Joe

[hkelsey]

Thanks for your help Joe, I now can move on to the machining stage.

Regards,

H arley