Mastercam X2 OSP5000L-G lathe post

[crcnc]

Does anyone have a OSP5000L lathe post for Mastercam X2.
Thanks.

[Ymryl]

Yes, your reseller does.

[crcnc]

Thanks

[karabatak]

Originally Posted by crcnc Does anyone have a OSP5000L lathe post for Mastercam X2. Thanks.

dou you have the post for osp 5000 can i have it
thanks

[Rally]

If you have a Legal Copy of the Software just contact Mastercam they will create a custom post to your needs.
Other than that I think it is against Forum rules to share such files.

[karabatak]

Originally Posted by Rally If you have a Legal Copy of the Software just contact Mastercam they will create a custom post to your needs. Other than that I think it is against Forum rules to share such files.

they asked 4200 euro for one post processor so i cant pay it

[Rally]

The Software comes with a Post period!
I don't know where you got the Software but the reseller I talked to would supply me with a Post of my choice.
I don't know how or why that would be different for you.
In any way, I don't recall ever seeing post processors being traded here.
Google it! maybe you will find it there. I would not know where else to look.
But good luck!

[karlis_m]

I have a post processor for an OKUMA LC 20 that is 25 years old that works
on MasterCam X2 - the controller is OSP5020L

Is this of interest to you ?


Regards from

Karlis

[longoria]

Hi, mi name is alberto

i´m interested in have a copy of this ones post, if you could send me a copy will thank you so much.

My email is a.longoria.juarez@hotmail.com

Just a last question, Do you know if it works with Mastercam X?

[thavee_por]

Originally Posted by karlis_m I have a post processor for an OKUMA LC 20 that is 25 years old that works on MasterCam X2 - the controller is OSP5020L Is this of interest to you ? Regards from Karlis

dear Karlis
i am very interace with your post, my m/c is LR15 OSP5020L
if available for you, please kindly send to me.
my email is thavee_por@hotmail.com
best regards