Need Mastercam post for Bridgeport EZTrak DX 2 axis mill - CNCzone.com-The Largest Machinist Community on the net!

Mal@AMTS · #1 04-23-2007, 04:36 AM

Hey all

Can anyone help with a suitable post for Mastercam V9 to Bridgeport EzTrak DX 2 mill, machine will also accept Boss G code posts. Thanks

jose aguillon · #2 06-05-2007, 01:25 PM

go to mastercam files and install the additional postprocessors files and get it from them.

Delcamfan · #3 06-09-2007, 01:26 AM

You will probably find that there isnt a post that will work specifically for what you need.....If you have a sample program that works send it to me and i will write one for you......

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mastercam X MACH 3 POST - Bridgeport Series 1 CNC (was BOSS5)	bbuonomo	Screen Layouts, Post Processors & Misc	4	12-31-2006 11:41 PM
Best upgrade to 2 axis CNC for bridgeport mill?	mbwittig	Bridgeport and Hardinge Mills	1	10-23-2006 07:59 AM
Mastercam Handbook Vol. 3 or 4 & 5 Axis Mill Training Tutorial... which is better?	Beezer	Mastercam	10	09-13-2006 07:33 PM
Mastercam 5 axis Post	machininsumbich	Post Processor Files	0	09-08-2006 10:09 AM
EZTRAK retrofit by AjaxCNC on a Bridgeport	NC Cams	AjaxCNC Control Products	6	04-25-2006 08:50 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)