LinkBack URL
About LinkBacks
Mastercam X comes with a Fadal format 1 post and a fadal format 2 post. They should be available under the Mill machine type. If they are not check your install cd or contact your Mastercam dealer as these posts are available.
Hope this helps
AC
| | |
Well, first off I'm new to this forum so hello to everyone. I'm new to CNC being I've only been doing it for 6 months so don't mind my lack of knowledge.
I need a post processor for MasterCam X for a Fadal VMC 15. My shop class is currently using Virtual Gibbs but, I would rather use MasterCam because it seems to be capable of a lot more and it's easier to use. The problem is I don't know much about post processors so I can make one or modify one to work with our machine.
Thanks in advance for any help.
Mastercam X comes with a Fadal format 1 post and a fadal format 2 post. They should be available under the Mill machine type. If they are not check your install cd or contact your Mastercam dealer as these posts are available.
Hope this helps
AC
Ok, thanks I never personally looked i was just trusting the word of my cousin in the shop. he said he could not find a post for it.
Guess you need to do things yourself.
You could also use the mpmaster post for format2, I have had great luck with that post.
Posting Permissions
| | |
