5 Axis Swivel Rotary Table pos-processor?

[pedro neves]

Hello...
Does anyone have a pos-processor for AlphaCAM software for this type of machine:
-5 axis
-XYZ axis linear movement
-C axis rotary movement around +z axis
-B axis rotary movement is 45 degrees between -y axis and +z axis
Is a so called- machine with Swivel Rotary Table
Machine example- Deckel Maho 70 Evo

I have lots of pos-processor for Alphacam and PowerMill.....

[Martynas2]

Maybe you can share those PP for Alphacam? I have 5 axis PP for this machine if you need http://www.bacci.com/cgi-bin/bacci/p...IdF=11&Lin=eng (control: Allen Bradley)

[Martynas2]

[matty 29]

hi i have a post for dmg 5 axis siemens using traori will be willing to do a swap for something you have got for alphacam. drop me an e-mail matthew_aldred21@hotmail.com

[terococo]

Hello ,

I m looking for a post processor for Alphacam for this type of machine :
- 4 axis
- xyz axis linear movements
- A axis rotary movement around x axis
Tool stays vertical ( no B axis) but A axis cans rotate together with xyz

Machine example : Hermle C800 U

Originally Posted by pedro neves Hello... Does anyone have a pos-processor for AlphaCAM software for this type of machine: -5 axis -XYZ axis linear movement -C axis rotary movement around +z axis -B axis rotary movement is 45 degrees between -y axis and +z axis Is a so called- machine with Swivel Rotary Table Machine example- Deckel Maho 70 Evo I have lots of pos-processor for Alphacam and PowerMill.....

[jojojoo]

I have a post for Heidenhain Decho MillPlus 5 Axis machine. Dont know if this is the one you are looking for tho.
Let me know

[matty 29]

hi i would be intrestead in your post if you would share cheers

[terococo]

Hello Jojojoo ,

I dont know what DECHO is but the post pro i m looking for is for a cnc heidenhain , so i think it could be interesting to test the one you have if you re ok for sharing ?
Thanks for your help

Best regards

Terococo

[pgman68]

hi dear,
is that for gibbscam or mastercam, if yes could i please have a copy.

[pgman68]

do you have a 5 axis swivel rotary table post processors for gibbscam that you could share with me, I have lots of post processors, just tell me what you need.