I have a post processor at the moment but there are that many flaws in it, I want to start from scratch. Problems cancelling high speed machining (G05 P10000 / G05 P0) during drilling cycles. Sometimes not picking up drilling cycles but just moving to X Y position and doing nothing. Getting bogged down with it now. Ready to buy an old Cincinatti and employ an 80 year old miller!!
Any help please
Last edited by Lilge68; 03-01-2007 at 05:24 AM.
WHAT IS CAD CAM system you use (POWERMILL) and then the machines that TENS and control