DMG 70V Mastercam X post processor.SOS!!!

[cpaidas]

Goodmorning. Does anybody have the post processor files for a DMG DMU 70V mill center, for Mastercam X?

Tank in advance...

[aussie28]

give me your email

[aussie28]

I lost you from last time. Hope u get the post. i used to work on DMG 70V and Mc 9.1.

[SHORT_JOHN]

Hey does anybody know the proper use of the G29 jump command?
I figured out how to use sub-programs on these machines, but I 'd rather use the G29 jump command.
When using sub-programs I have to have too many Programs to load into the machine.
I have a main progr. (.pm) and 10 subs (.mm)
I'd rather just have one program that was able to jump around inside itself and do the same thing subs do.
Anybody have any experience with these controls? Have a MillPlus control.
Using MasterCam X2 to program.

Thanks for any ideas.

[elfresator]

salve, cerco post processor per sigma flexy 5 ax con selca 4060
se qualcuno mi può dare una mano ne sarei lieto
mia email elfresator@libero.it

[rishi_j]

Good day folks,

I'm new here, I am performing a research study on a CNC Lathe and have come across the Basic Fanuc Lathe Postprocessor.


I was instructed by my professor to examine the .txt file and relate what I understand by the code to him.

However, I have no clue what this code is about nor do I know where to start from.


Code can be found at http://mastercam.com/TeachersStudent...s/Default.aspx



The code is :

[post menu]
menu 1 {
"Post Processor:",
"&Change",
"&Run",
"",
"",
"",
"",
"",
"Run &old",
"",
"&Update PST"}
[canned text]
1. "Text 1"
2. "Text 2"
3. "Text 3"
4. "Text 4"
5. "Text 5"
6. "Text 6"
7. "Text 7"
8. "Text 8"
9. "Text 9"
10. "Text 10"
[lathe misc reals]
1. "Misc. real [1]"
2. "Misc. real [2]"
3. "Misc. real [3]"
4. "Misc. real [4]"
5. "Misc. real [5]"
6. "Misc. real [6]"
7. "Misc. real [7]"
8. "Misc. real [8]"
9. "Misc. real [9]"
10. "Misc. real [10]"
[lathe misc integers]
1. "Misc. integer [1]"
2. "Misc. integer [2]"
3. "Misc. integer [3]"
4. "Misc. integer [4]"
5. "Misc. integer [5]"
6. "Misc. integer [6]"
7. "Misc. integer [7]"
8. "Misc. integer [8]"
9. "Misc. integer [9]"
10. "Misc. integer [10]"
[lathe drill cycle descriptions]
1. "Simple drill - no peck"
2. "Peck drill - full retract"
3. "Chip break - incremental retract"
4. "Tapping - feed in, reverse spindle - feed out"
5. "Boring #1 - feed out"
6. "Boring #2 - stop spindle - rapid out"
7. "Misc #1 Drill"
8. "Misc #2 Drill"
9. "Custom drill cycle #9"
10. "Custom drill cycle #10"
11. "Custom drill cycle #11"
12. "Custom drill cycle #12"
13. "Custom drill cycle #13"
14. "Custom drill cycle #14"
15. "Custom drill cycle #15"
16. "Custom drill cycle #16"
17. "Custom drill cycle #17"
18. "Custom drill cycle #18"
19. "Custom drill cycle #19"
20. "Custom drill cycle #20"

[lathe simple drill]
1. "Drill/Cbore"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. ""
8. ""
9. ""
10. ""
11. ""
[lathe peck drill]
1. "Peck Drill"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. ""
11. ""
[lathe chip break]
1. "Chip Break"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. ""
[lathe tap]
1. "Tap"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. ""
8. ""
9. ""
10. ""
11. ""
[lathe bore2]
1. "Bore #2"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. ""
8. ""
9. ""
10. ""
11. "Shift"
[lathe misc1]
1. "Misc. #1"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"
[lathe misc2]
1. "Misc. #2"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"
[lathe drill cycle 9]
1. "Custom cycle 9"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"

[lathe drill cycle 10]
1. "Custom cycle 10"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"

[lathe drill cycle 11]
1. "Custom cycle 11"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"

[lathe drill cycle 12]
1. "Custom cycle 12"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"

[lathe drill cycle 13]
1. "Custom cycle 13"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"

[lathe drill cycle 14]
1. "Custom cycle 14"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"

[lathe drill cycle 15]
1. "Custom cycle 15"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"

[lathe drill cycle 16]
1. "Custom cycle 16"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"

[lathe drill cycle 17]
1. "Custom cycle 17"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"

[lathe drill cycle 18]
1. "Custom cycle 18"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"

[lathe drill cycle 19]
1. "Custom cycle 19"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"

[lathe drill cycle 20]
1. "Custom cycle 20"
2. ""
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"

[lathe drill custom param 1]
1. "1-Drill parameter #1"
2. "1-Drill parameter #2"
3. "1-Drill parameter #3"
4. "1-Drill parameter #4"
5. "1-Drill parameter #5"
6. "1-Drill parameter #6"
7. "1-Drill parameter #7"
8. "1-Drill parameter #8"
9. "1-Drill parameter #9"
10. "1-Drill parameter #10"
11. "Custom Drill Parameters 1"

[lathe drill custom param 2]
1. "2-Drill parameter #1"
2. "2-Drill parameter #2"
3. "2-Drill parameter #3"
4. "2-Drill parameter #4"
5. "2-Drill parameter #5"
6. "2-Drill parameter #6"
7. "2-Drill parameter #7"
8. "2-Drill parameter #8"
9. "2-Drill parameter #9"
10. "2-Drill parameter #10"
11. "Custom Drill Parameters 2"

[lathe drill custom param 3]
1. "3-Drill parameter #1"
2. "3-Drill parameter #2"
3. "3-Drill parameter #3"
4. "3-Drill parameter #4"
5. "3-Drill parameter #5"
6. "3-Drill parameter #6"
7. "3-Drill parameter #7"
8. "3-Drill parameter #8"
9. "3-Drill parameter #9"
10. "3-Drill parameter #10"
11. "Custom Drill Parameters 3"

[lathe drill custom param 4]
1. "4-Drill parameter #1"
2. "4-Drill parameter #2"
3. "4-Drill parameter #3"
4. "4-Drill parameter #4"
5. "4-Drill parameter #5"
6. "4-Drill parameter #6"
7. "4-Drill parameter #7"
8. "4-Drill parameter #8"
9. "4-Drill parameter #9"
10. "4-Drill parameter #10"
11. "Custom Drill Parameters 4"

[lathe drill custom param 5]
1. "5-Drill parameter #1"
2. "5-Drill parameter #2"
3. "5-Drill parameter #3"
4. "5-Drill parameter #4"
5. "5-Drill parameter #5"
6. "5-Drill parameter #6"
7. "5-Drill parameter #7"
8. "5-Drill parameter #8"
9. "5-Drill parameter #9"
10. "5-Drill parameter #10"
11. "Custom Drill Parameters 5"

[lathe drill custom param 6]
1. "6-Drill parameter #1"
2. "6-Drill parameter #2"
3. "6-Drill parameter #3"
4. "6-Drill parameter #4"
5. "6-Drill parameter #5"
6. "6-Drill parameter #6"
7. "6-Drill parameter #7"
8. "6-Drill parameter #8"
9. "6-Drill parameter #9"
10. "6-Drill parameter #10"
11. "Custom Drill Parameters 6"

[lathe drill custom param 7]
1. "7-Drill parameter #1"
2. "7-Drill parameter #2"
3. "7-Drill parameter #3"
4. "7-Drill parameter #4"
5. "7-Drill parameter #5"
6. "7-Drill parameter #6"
7. "7-Drill parameter #7"
8. "7-Drill parameter #8"
9. "7-Drill parameter #9"
10. "7-Drill parameter #10"
11. "Custom Drill Parameters 7"

[lathe drill custom param 8]
1. "8-Drill parameter #1"
2. "8-Drill parameter #2"
3. "8-Drill parameter #3"
4. "8-Drill parameter #4"
5. "8-Drill parameter #5"
6. "8-Drill parameter #6"
7. "8-Drill parameter #7"
8. "8-Drill parameter #8"
9. "8-Drill parameter #9"
10. "8-Drill parameter #10"
11. "Custom Drill Parameters 8"

[lathe drill custom param 9]
1. "9-Drill parameter #1"
2. "9-Drill parameter #2"
3. "9-Drill parameter #3"
4. "9-Drill parameter #4"
5. "9-Drill parameter #5"
6. "9-Drill parameter #6"
7. "9-Drill parameter #7"
8. "9-Drill parameter #8"
9. "9-Drill parameter #9"
10. "9-Drill parameter #10"
11. "Custom Drill Parameters 9"

[lathe drill custom param 10]
1. "10-Drill parameter #1"
2. "10-Drill parameter #2"
3. "10-Drill parameter #3"
4. "10-Drill parameter #4"
5. "10-Drill parameter #5"
6. "10-Drill parameter #6"
7. "10-Drill parameter #7"
8. "10-Drill parameter #8"
9. "10-Drill parameter #9"
10. "10-Drill parameter #10"
11. "Custom Drill Parameters 10"

[lathe drill custom param 11]
1. "11-Drill parameter #1"
2. "11-Drill parameter #2"
3. "11-Drill parameter #3"
4. "11-Drill parameter #4"
5. "11-Drill parameter #5"
6. "11-Drill parameter #6"
7. "11-Drill parameter #7"
8. "11-Drill parameter #8"
9. "11-Drill parameter #9"
10. "11-Drill parameter #10"
11. "Custom Drill Parameters 11"

[lathe drill custom param 12]
1. "12-Drill parameter #1"
2. "12-Drill parameter #2"
3. "12-Drill parameter #3"
4. "12-Drill parameter #4"
5. "12-Drill parameter #5"
6. "12-Drill parameter #6"
7. "12-Drill parameter #7"
8. "12-Drill parameter #8"
9. "12-Drill parameter #9"
10. "12-Drill parameter #10"
11. "Custom Drill Parameters 12"

[lathe drill custom param 13]
1. "13-Drill parameter #1"
2. "13-Drill parameter #2"
3. "13-Drill parameter #3"
4. "13-Drill parameter #4"
5. "13-Drill parameter #5"
6. "13-Drill parameter #6"
7. "13-Drill parameter #7"
8. "13-Drill parameter #8"
9. "13-Drill parameter #9"
10. "13-Drill parameter #10"
11. "Custom Drill Parameters 13"

[lathe drill custom param 14]
1. "14-Drill parameter #1"
2. "14-Drill parameter #2"
3. "14-Drill parameter #3"
4. "14-Drill parameter #4"
5. "14-Drill parameter #5"
6. "14-Drill parameter #6"
7. "14-Drill parameter #7"
8. "14-Drill parameter #8"
9. "14-Drill parameter #9"
10. "14-Drill parameter #10"
11. "Custom Drill Parameters 14"

[lathe drill custom param 15]
1. "15-Drill parameter #1"
2. "15-Drill parameter #2"
3. "15-Drill parameter #3"
4. "15-Drill parameter #4"
5. "15-Drill parameter #5"
6. "15-Drill parameter #6"
7. "15-Drill parameter #7"
8. "15-Drill parameter #8"
9. "15-Drill parameter #9"
10. "15-Drill parameter #10"
11. "Custom Drill Parameters 15"

[lathe drill custom param 16]
1. "16-Drill parameter #1"
2. "16-Drill parameter #2"
3. "16-Drill parameter #3"
4. "16-Drill parameter #4"
5. "16-Drill parameter #5"
6. "16-Drill parameter #6"
7. "16-Drill parameter #7"
8. "16-Drill parameter #8"
9. "16-Drill parameter #9"
10. "16-Drill parameter #10"
11. "Custom Drill Parameters 16"

[lathe drill custom param 17]
1. "17-Drill parameter #1"
2. "17-Drill parameter #2"
3. "17-Drill parameter #3"
4. "17-Drill parameter #4"
5. "17-Drill parameter #5"
6. "17-Drill parameter #6"
7. "17-Drill parameter #7"
8. "17-Drill parameter #8"
9. "17-Drill parameter #9"
10. "17-Drill parameter #10"
11. "Custom Drill Parameters 17"

[lathe drill custom param 18]
1. "18-Drill parameter #1"
2. "18-Drill parameter #2"
3. "18-Drill parameter #3"
4. "18-Drill parameter #4"
5. "18-Drill parameter #5"
6. "18-Drill parameter #6"
7. "18-Drill parameter #7"
8. "18-Drill parameter #8"
9. "18-Drill parameter #9"
10. "18-Drill parameter #10"
11. "Custom Drill Parameters 18"

[lathe drill custom param 19]
1. "19-Drill parameter #1"
2. "19-Drill parameter #2"
3. "19-Drill parameter #3"
4. "19-Drill parameter #4"
5. "19-Drill parameter #5"
6. "19-Drill parameter #6"
7. "19-Drill parameter #7"
8. "19-Drill parameter #8"
9. "19-Drill parameter #9"
10. "19-Drill parameter #10"
11. "Custom Drill Parameters 19"

[lathe drill custom param 20]
1. "20-Drill parameter #1"
2. "20-Drill parameter #2"
3. "20-Drill parameter #3"
4. "20-Drill parameter #4"
5. "20-Drill parameter #5"
6. "20-Drill parameter #6"
7. "20-Drill parameter #7"
8. "20-Drill parameter #8"
9. "20-Drill parameter #9"
10. "20-Drill parameter #10"
11. "Custom Drill Parameters 20"

[Stock Transfer Custom Parameters]
2296. "Custom integer #1:"
2298. "Custom integer #2:"
2300. "Custom integer #3:"
2302. "Custom integer #4:"
2304. "Custom integer #5:"
2306. "Custom integer #6:"
2308. "Custom integer #7:"
2310. "Custom integer #8:"
2312. "Custom integer #9:"
2314. "Custom integer #10:"
2316. "Custom real #1:"
2318. "Custom real #2:"
2320. "Custom real #3:"
2322. "Custom real #4:"
2324. "Custom real #5:"
2326. "Custom real #6:"
2328. "Custom real #7:"
2330. "Custom real #8:"
2332. "Custom real #9:"
2334. "Custom real #10:"
10000. "Stock Transfer Custom Parameters"

[Stock Flip Custom Parameters]
2296. "Custom integer #1:"
2298. "Custom integer #2:"
2300. "Custom integer #3:"
2302. "Custom integer #4:"
2304. "Custom integer #5:"
2306. "Custom integer #6:"
2308. "Custom integer #7:"
2310. "Custom integer #8:"
2312. "Custom integer #9:"
2314. "Custom integer #10:"
2316. "Custom real #1:"
2318. "Custom real #2:"
2320. "Custom real #3:"
2322. "Custom real #4:"
2324. "Custom real #5:"
2326. "Custom real #6:"
2328. "Custom real #7:"
2330. "Custom real #8:"
2332. "Custom real #9:"
2334. "Custom real #10:"
10000. "Stock Flip Custom Parameters"

[Stock Advance Custom Parameters]
2296. "Custom integer #1:"
2298. "Custom integer #2:"
2300. "Custom integer #3:"
2302. "Custom integer #4:"
2304. "Custom integer #5:"
2306. "Custom integer #6:"
2308. "Custom integer #7:"
2310. "Custom integer #8:"
2312. "Custom integer #9:"
2314. "Custom integer #10:"
2316. "Custom real #1:"
2318. "Custom real #2:"
2320. "Custom real #3:"
2322. "Custom real #4:"
2324. "Custom real #5:"
2326. "Custom real #6:"
2328. "Custom real #7:"
2330. "Custom real #8:"
2332. "Custom real #9:"
2334. "Custom real #10:"
10000. "Stock Advance Custom Parameters"

[Chuck Custom Parameters]
2296. "Custom integer #1:"
2298. "Custom integer #2:"
2300. "Custom integer #3:"
2302. "Custom integer #4:"
2304. "Custom integer #5:"
2306. "Custom integer #6:"
2308. "Custom integer #7:"
2310. "Custom integer #8:"
2312. "Custom integer #9:"
2314. "Custom integer #10:"
2316. "Custom real #1:"
2318. "Custom real #2:"
2320. "Custom real #3:"
2322. "Custom real #4:"
2324. "Custom real #5:"
2326. "Custom real #6:"
2328. "Custom real #7:"
2330. "Custom real #8:"
2332. "Custom real #9:"
2334. "Custom real #10:"
10000. "Chuck Custom Parameters"

[Tailstock Custom Parameters]
2296. "Custom integer #1:"
2298. "Custom integer #2:"
2300. "Custom integer #3:"
2302. "Custom integer #4:"
2304. "Custom integer #5:"
2306. "Custom integer #6:"
2308. "Custom integer #7:"
2310. "Custom integer #8:"
2312. "Custom integer #9:"
2314. "Custom integer #10:"
2316. "Custom real #1:"
2318. "Custom real #2:"
2320. "Custom real #3:"
2322. "Custom real #4:"
2324. "Custom real #5:"
2326. "Custom real #6:"
2328. "Custom real #7:"
2330. "Custom real #8:"
2332. "Custom real #9:"
2334. "Custom real #10:"
10000. "Tailstock Custom Parameters"

[Steady Rest Custom Parameters]
2296. "Custom integer #1:"
2298. "Custom integer #2:"
2300. "Custom integer #3:"
2302. "Custom integer #4:"
2304. "Custom integer #5:"
2306. "Custom integer #6:"
2308. "Custom integer #7:"
2310. "Custom integer #8:"
2312. "Custom integer #9:"
2314. "Custom integer #10:"
2316. "Custom real #1:"
2318. "Custom real #2:"
2320. "Custom real #3:"
2322. "Custom real #4:"
2324. "Custom real #5:"
2326. "Custom real #6:"
2328. "Custom real #7:"
2330. "Custom real #8:"
2332. "Custom real #9:"
2334. "Custom real #10:"
10000. "Steady Rest Custom Parameters"


(end of file)




Can anyone help me in understanding this code please?

[yaoyu]

look this video
http://www.3322.com.cn/readfile.aspx...322_1-22901-35
or
http://dx.mouldbbs.com/attachment.php?aid=573682

the video come from china,using UpdatePost.dll

[Stran]

Can anyone help me with 5 axis post for fadal.
I do really appreciated. Thank You

[kuno]

hello i m from germany and i need a postprozessor for dmu 70 v can you help me?
my english is not good .
sorry.

[restacopa]

hallo aussie. I' m late but i' m back. Please send me the post for the dmu70v for mcamx. does it work with x2? Do you have posts for the siemens control for a new dmg mill? if yes I will be grateful.

Seng the posts to restacopa@gmail.com

thanx

[restacopa]

give me your email

my email is restacopa@gmail.com

[cncdeckel]

hello
i have also baught a DMG 1035V with siemen control, and i'm programing with mastercamX2 on other machines... i dont have the general post or the good post for the siemen control do you still help with this!? plleeaasseee!!