Haas Post - CNCzone.com-The Largest Machinist Community on the net!

Gerry · #1 04-07-2003, 03:26 PM

Anybody have a post for a TL-15 lathe?

badRandle · #2 04-24-2003, 12:23 AM

I have all the pst (post) files included with V9 lath and mill, I can send you any or all of them if you like. You may be able to customize one that is close to your specific needs.

hardmill · #3 04-24-2003, 12:35 AM

If you need help configuring your post drop a line.
We can find a way to get yours working.
Peace.

cadcam · #4 04-27-2003, 08:20 PM

Badrandle at this time master came does not sgip with a Mplhaas.pst but to get close start out with the MPLfan.pst post this is the Fanuc post that is the default from the install.

I have allso checked my install of MC 9.1 release and still no standerd Haas post.

Have you tried speaking with your local dealer they should be able to take care of this with most likly no cost to you.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Emco Compact 5 PC...have ????	Double G	Mini Lathe	42	08-22-2010 07:26 PM
Upgrading control hardware - Emco	eDudlik	General CNC (Mill and Lathe) Control Software (NC)	21	12-08-2009 01:52 AM
need post files for smartcam ( Haas machine )	cv252525	General CAM Discussion	3	02-25-2008 10:14 AM
Post for Haas SL?	WOLOG	BobCad-Cam	9	04-09-2004 04:55 PM
haas post	chris zuko	Mastercam	1	10-21-2003 02:56 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)