MP for Matsuura MC-760

[macds]

Guys/Girls;

Trying to set up the old matsuura here at the shop, got it to dnc using a BTR.... having problems with the post.
Just wondering if anyone out there would have a mastercam 9 post for this Matsuura MC-760 with Yasnac MX2 control?
Biggest problems right now are with the tool changes (wont change tools)
and various other thing that throw errors.

BTW im shakey at best with g/m code, as ive been spoonfed by mastercam for years now :P

Thanks so much in advance

Stu

[matsuura]

hi macds i have a matsuura mc-800 vf whit a yasnac i-80m when i post whit mc v9 my first lines are

N100 G17
N102 G20
N104 G00 G40 G49 G80 G90
N106 G91 G28 Z0.
N108 T15 M06 ( 1" FLAT ENDMILL)
N110 (MAX - Z.25)
N112 (MIN - Z-.01)
N114 G00 G90 G54 X-3.6 Y-2.2499 S3200 M03
N116 G43 H15 Z.25 T1
N118 Z.1

hope this help

den

[macds]

Not really,

I know rougly what i want, but i dont know how to change it in the post... basically

Thanks

Stu

[matsuura]

i dont know if he will work ,but do you want my post?

[macds]

im willing to try anything at this point...
Thanks

email to impala_stu@hotmail.com

Thanks so much

[matsuura]

email sent tell me if it work

[macds]

Havnt recieved yet, please resend

[matsuura]

email resent

have you recieved it?

[matsuura]

hey macds, how things are going have you machine something yet?

[macds]

matsuura, so looks to have solved most of my problems, only thing now is that i keep getting "double add" errors.
Im currently looking into this, as from the explanation in the operators manual leads me to believe that the post is outputting the same command twice in the same block. However ive checked the code out, and am not seeing this.
If I send the same code again, it generally works fine the second time through, but this would be a huge pain when finishing larger surfaces
Any thoughts would be appreciated.

Thanks

[matsuura]

does it do this only at the biggining of the program,if i put (ddd(ssss)hhh),something like that it give me an alarm

could check this out
http://www.yaskawa.com/site/Support....Codes?OpenForm

[macds]

could be at any point in the program... still researching... ill keep you posted