| | |
3 Axis Heidenhein post processor for MasterCAMX anyone can send to me 3 Axis Heidenhein post processor for MasterCAMX
or anyone can tell me how Ican update the post from v9 to vx
To update go Alt-C on the keyboard, then look for updatepost.dll its the 3rd to the last option.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Owner, contract Programming and Consultant , Mastercam Instructor and on line trainer at www.eapprentice.net
Some tips: http://www.youtube.com/PrecisionProgramming
Posting Permissions
| | |
LinkBack URL
About LinkBacks
