UG Fanuc WEDM

[rschap1]

Any have or know of a "good" post for Unigraphics NX4 to Fanuc wire machine 2 and/or 4 axis' THANKS!

[timoty]

I guess You can download it from UGS ftp site.

[rschap1]

I am not seeing any on their site for Fanucs. Lots of mill and a few lathe posts for Fanuc, but no wire edm. Thanks for responding though!

[timoty]

I visited the UG ftp site, you are right there is nothing. If you cant find postprocessor I could write it for you. But off course nothing is free. On the other hand you will get customized postprocessor optimized just for your needs. For writing a post I need sample of G-code. Any materials that could help me to write wire post for Fanuc control.

timoty@hot.ee

[rschap1]

We do currently have a 2x and 4x post. We are getting by with those. A few commands are inserted manual. Probably wouldn't be able to talk my boss into spending anything on one unless it had ALL the Bells and Whistles and included the kitchen sink too. We are looking into Postbuilder training also, so may be able to refine our current, or develop new with all the cool options shortly. Thanks for the offer, if it comes to an issue of timelyness vs. cost, may look you up.