Need a postprocessor for gibbscam

[pgman68]

Hi Guys

I am new in here, I am in need for a postprocessor for acramatic 2100 control. I am currently using gibbscam 2005 v7.7. Can anybody in here help.

[Torchhead]

Sorry, this is a SheetCAM forum which is a 2D/ 2.5D CAM program. The Post processors are for the SheetCAM application

[richrod]

If you need, the post procesor please write again because i haved various post for gibbs cam and another software, included acramatic 2100.

i hope .i can help you

[pgman68]

Your help would be greatly appreciated. I am still in the need for a gibbscam post for the acramatic 2100 control.

[pgman68]

I appreciate it a lot. Thank You Very much, You definately give me a good start with gibbscam. If you need a software or a file, dont hesitate to ask. If I have it I would definately send it to you. I live in canada.

[alain aleman]

Originally Posted by richrod Hi pgman68 I live in Puerto Rico, but i try to help you In this file I send two files. one for lathe and the other for milling. If you need help don't doubt to contact me.

Hi guy, do you have a mcx post to HAAS lathe?

Thanks from Peru.

Alain

[richrod]

Alain Aleman
Happy New Year From Puerto Rico

Yes I have it,

What is your control or lathe model? because i got various post.

[alain aleman]

Originally Posted by richrod Alain Aleman Happy New Year From Puerto Rico Yes I have it, What is your control or lathe model? because i got various post.

Hi Richrod, happy new year too.

Thanks for your attention, my HAAS lathe is a TL-3 model with HAAS control.

Thank you again and greetings from Peru.

Alain

[vizient]

Hey Im Looking For A Gibbs Cam Post For A Centurion 6 Sls On A Milltronics 3 Axis With Out A Tool Changer Can Anybody Help Me

[toolman of NC]

Originally Posted by vizient Hey Im Looking For A Gibbs Cam Post For A Centurion 6 Sls On A Milltronics 3 Axis With Out A Tool Changer Can Anybody Help Me

Hello, I will check the control on our Milltronics. Is it a old machine?

[ccroyscuba]

Do you have a Gibbscam post for an anilam crusader 2L ?

[Sakis818]

Hi,Guys
Please help
i need a postprocessor for Gildemeister Nef Ct40 EPL2
for GibbsCam 2006
Thanks.